Sometimes, users need assistance with answering the questions of an interview. docassemble facilitates such assistance in a number of ways, some of which are automatic and others of which require the intervention of a human operator:
- Users can go to the “Help” tab to read
interview helpand question-specific
- Users can listen to
videoembedded in questions or help text.
- The roles feature can be used to involve a human assistant as a co-interviewee. When the interview requires the assistant to answer a question, docassemble will e-mail the assistant a notification while telling the user to wait. After the assistant provides the necessary input, docassemble notifies the user by e-mail that he or she can proceed with the interview.
This section explains three additional features that facilitate the provision of assistance to users in real time.
First feature: session monitor
On the monitor screen, operators can see a list of currently active interviews. They can communicate via live chat with users and control which users are allowed to contact them by phone. While communicating by live chat or by phone, the operator can see the screen that the user is currently seeing. The user’s changes to the screen are shown to the operator in real time. The operator can also join the interview as a co-interviewee. Interviews can be set up so that operators can make corrections to the user’s answers.
Second feature: text-based “live chat”
During a live chat conversation, the user sees a screen like the following:
Meanwhile, the operator sees something like this on the monitor screen:
The operator can carry on multiple live chat conversations simultaneously.
Conversations will typically take place between the user and an operator, but it is also possible for the users of a multi-user interview to use live chat to communicate with each other.
Third feature: telephone call forwarding
If live chat is not convenient to answer the user’s questions, the operator can connect with the user by telephone. By clicking a button, the operator can instruct the user to call a phone number and then type in a four-digit access code. The user’s call will then be transferred to the operator. This hides the operator’s actual phone number from the user. The access code expires after a period of minutes. (This feature requires a Twilio account; call forwarding charges apply.)
These three features are explained in more detail in the sections below.
To go to the Monitor, log in to docassemble as a user with “admin” or “advocate” privileges and select “Monitor” from the menu.
The Monitor page looks like this:
It shows a list of currently active interviews for which the live help features have been enabled. Operators can use this screen to chat with one or more users simultaneously, as well as to observe users’ interviews.
Chat availability settings
Users who activate chat will automatically be connected to an available operator, if an operator is available.
Whether an operator is available depends on two settings.
First, operators can control whether they are available for chatting at all by toggling their “status” between “Not available for chat” and “Available for chat.”
Second, operators can select the “roles” for they wish to be available. The interviews on your server may cover a variety of topics, and your operators may only be willing to serve as operators if they are asked about interviews within their areas of expertise.
Operators can use the “roles” feature on the Monitor to indicate this subject matter preference. In this example, there are two possible areas of expertise: a general “advocate” and a more specific “family law” area of expertise.
When an interview developer uses
set_live_help_status() to enable the chat
feature, the developer indicates which “partner roles,” or areas of
expertise, are required for the interview. One interview may indicate
“estates” as a partner role, while another may indicate “family law.”
This is the source of the “roles” that the operator sees on the
Selecting more than one “role” means that the operator is available to serve in any of the roles. (That is, the roles are connected by “or” rather than “and.”)
Phone number setting
Once a phone number is set, the operator can use the telephone call forwarding feature.
Under “Sessions,” the operator will see a list of active interviews
where the interview developer has used
set_live_help_status() to enable
the user and the operator to communicate.
Active sessions for interviews where
set_live_help_status() has not
been run will be invisible.
(It is important for interview developers to inform users that operators
may be monitoring their session. Interview logic can be used to run
set_live_help_status() only if and only when the user has consented to
monitoring by an operator.)
Each session listing consists of:
- A status indicator:
- means that the user is waiting for available chat partners to appear;
- means that a chat partner is available, but the user has not activated chat;
- means that the user has activated live chat; and
- means that live chat is turned off in the user’s interview, but the user’s screen can still be observed and controlled.
- means that the user’s session has become inactive.
- The interview title (as set in the metadata).
- The name of the interviewee, if the user is signed in.
- Control buttons:
- allows the operator to see a real-time view of the user’s screen, and then take control of the screen if necessary;
- opens a new tab in the operator’s browser, where the operator becomes a co-interviewee in the on-going interview.
- can be used by the operator to terminate an existing chat conversation or to prevent the user from initiating one, without affecting the operator’s availability to other sessions.
When a user is connected with an operator, a live chat conversation area will appear within the session entry.
The operator can carry on multiple conversations at the same time.
To help the operator manage these conversations, the Monitor attempts to use the desktop notifications feature of the browser. When a chat message arrives, the session entry will be highlighted in yellow and remain highlighted until the operator clicks inside of the message box. If a chat message arrives in a session for which the entry is off-screen, the operator will be notified whether the new message is above or below.
The button displays a real time view of a user’s interview screen. It changes as the user makes changes to a form or moves from screen to screen.
When the window first opens, the user’s changes may take up to six seconds to be reflected in the window. After that, changes are reflected without delay, except for typing in a text box, which may take up to six seconds to be reflected.
The view of the user’s screen is “read-only.” Operators cannot make changes. Clicking will hide the operator’s view of the user’s screen.
Users do not receive any kind of notification when an operator starts
viewing their screen. It is up to the interview developer to inform the
user that an operator might be watching. This can be done before
set_live_help_status() is called, or at the same time.
In addition to observing the user’s screen, the operator can take control and start answering questions on behalf of the user, while the user watches what the operator does.
When the operator presses the button, the user sees a notification like this:
While in this mode, the user sees changes that the operator makes to the screen in real time. The buttons on the user’s screen are disabled, so that the user cannot submit any changes. (The other controls are not disabled, but any changes that the user makes will be overwritten.)
Meanwhile, the operator can make changes to the user’s page in the miniature window:
When the operator presses the button, the user regains control of the interview:
Note that whenever the live help availability setting for an
interview is set to
'available', then any
operator can observe and control the interview without the user’s
consent. Therefore, when you design interviews, it is important that
before you call
set_live_help_status() to set the availability,
you inform the user that their session may be monitored.
When the operator clicks the
button, a new tab opens up in the operator’s browser. The effect is
similar to that of clicking on a URL created by the
interview_url() function. One difference is that the
multi_user variable does not need to be set to
True in order to
allow an operator to join an interview from the monitor.
The operator will join the interview with his or her own user identity, rather than with the identity of the user. This means that the view the operator sees is not necessarily the same as the view the user sees. Interview developers can (and probably should) create a special “back door” into the interview specifically for operators. For example, the interview developer could write the following into the interview:
Changes that the operator makes to the interview dictionary will be saved. However, the user will not see the effect of those changes until going to a new screen or reloading the page in the web browser.
The live chat system needs to be enabled by the interview using the
set_live_help_status() function. Then, depending on whether a chat
partner is available, the user will be able to go to the help tab
and chat with one or more chat partners.
Controlling the live chat system from an interview
Interview developers control the live chat system from an interview. They specify whether or not the user should have the option of using live chat, and the types of people with whom the user should be able to chat.
set_live_help_status() function takes three keyword arguments in
order to control three different settings.
Omitting a keyword argument simply means that the setting will not be affected.
'available': the user will be able to use live chat. Note, however, that unless a potential chat partner is available, users may not see the feature on the screen. Operators will also be able to observe and control the user’s screen.
'unavailable': the user will not be able to use live chat; they will not see any evidence that the feature exists. Operators will not see the interview session listed in the monitor.
'observeonly': the user will not be able to use live chat, but operators will be able to observe and control the user’s screen.
'help': the user will be able to have a private conversation with an administrator who is using the monitor system. In multi-user interviews, the other users will not be able to see the chat conversation.
'peer': In a multi-user interview, the user will be able to have a group conversation among all of the users who are currently using the same interview.
'peerhelp': This mode is a combination of
'peer'. Users can get help from an administrator using the monitor system, but any other users who use the interview will be able to see the chat history.
partner_roles setting is used to
indicate the necessary qualifications of any operator using the
monitor who will be able to chat with the user. For example, if
your interview concerns tax law, but the operators logged in to the
monitor only know about family law and criminal law, then you would
not want the user to be able to chat with one of the operators at that
You can set
partner_roles to either a list of roles
['tax law', 'estate law']) or to a single value (
If you use multiple values, an operator who selects any one of roles
will be connected with clients. (That is, they are connected by “or”
rather than “and.”) The values themselves are up to the interview
developer. When a user is using the interview, the monitor will see a
list of the partner roles requested and will be able to select the
roles for which they wish to make themselves available to chat. The
partner roles are case sensitive.
At least one “role” must be set.
Note that these “partner role” names are separate and distinct from
the names of privileges of user accounts and the names of “roles” in
multi-user interviews. The names of privileges need to be set up
by an administrator on the Privileges List. The names of “roles” in
multi-user interviews are controlled by interview developers using the
role_needed and the
role modifier. Although you may use common names among these
systems (e.g., “advocate,”) the three systems are independent.
If no operators or peers are available to chat, you might not want to turn on the live help system, or even inform the user about the existence of the system.
You can use the
chat_partners_available() to find out how many
people are available to chat.
Given a list of partner roles,
an object with two attributes:
.peer. Both values will
be integers representing the number of potential chat partners in each
The partner roles can be provided in a few different ways. The following all do the same thing:
chat_partners_available('advocate', 'family law')
chat_partners_available(['advocate', 'family law'])
chat_partners_available(partner_roles=['advocate', 'family law'])
If you are only interested in the value of
.peer, you do not need to
provide any partner roles; you can simply get the value of
If you want to access the chat log from the interview dictionary, you
can use the
get_chat_log() function. It will return a list of chat
messages in chronological order. Each entry in the list will be a
dictionary with the following keys:
message- the text of the message
datetime.datetimeobject (with a timezone) representing the time the message was sent.
user_email- the e-mail address of the sender. This will be
Noneif the user is anonymous.
user_first_name- the first name of the sender. This will be
Noneif the user is anonymous, and
''if the user has not set up a first name on the user profile page.
user_last_name- the last name of the sender. This will be
Noneif the user is anonymous, and
''if the user has not set up a last name on the user profile page.
get_chat_log() takes two optional keyword arguments:
datetimevalues are reported in Coordinated Universal Time.
timezone- if you want the
datetimevalues to be in a specific time zone, you can indicate the time zone with the
timezoneargument. This should be a plain text time zone like
Live chat from the user’s perspective
The user conducts live chat on the help tab of the interview.
The user can get to the help tab either by pressing “Help” in the
navigation bar or pressing the chat icon. If there is
interview help or question-specific
help text, the user will
see a “Help” tab in the navigation bar at the top of the screen. If
there is no “Help” tab in the navigation bar (i.e. because no
interview help or question-specific
help text exists), the
user will be able to access the “help” tab by clicking the live chat
Here is an scenario that illustrates how live chat works in
Suppose the user is in the middle of an interview when an operator goes to the monitor and sets his or her status to “Available to chat.” On the user’s screen, the chat icon appears in the navigation bar:
The user clicks the green chat icon and is taken the the “help” tab.
The chat session has not been activated yet – the input box is greyed out. At the bottom of the screen is a message showing that there is one operator standing by to chat with the user.
The user then clicks the button.
Now the input box is no longer greyed out.
Meanwhile, the operator who is using the Monitor can see that the status of the session is now “on.”
The session entry is highlighted in yellow to alert the operator that there is a new chat conversation.
Back on the user side, the user can now type a question:
After the user clicks send or presses “Enter,” the message is sent.
The message appears on the operator’s screen. The session entry is highlighted in yellow to indicate that a new chat message has arrived.
As soon as the operator clicks inside the chat box, the yellow highlighting goes away. (The color helps the operator keep track of which chat sessions are still awaiting operator input.)
The operator then starts typing a response.
After the operator clicks send or presses “Enter,” the message is sent.
Note that the two parties to the conversation are represented in different colors. The user’s own messages are yellow and flush right, while the chat partner’s messages are blue and on the left.
The user sees the operator’s question:
If the operator signs off, the user will still be able to access the chat log, but the icon in the navigation bar is no longer green.
Effect of chat “mode” setting
peerhelp, the user will be able to
activate chat even if no operators or peers are available. This
allows users of an interview to use the chat system as a “message
board” to leave messages for one another.
The user can terminate a live chat session by clicking the button.
The operator can terminate a live chat session by clicking the button.
Note that when the operator sets his or her status to “Not available to chat,” this does not have the effect of terminating any on-going chat sessions; rather, it has the effect of preventing new chat sessions from initiating.
If a chat session is on-going when the block button is pressed, the chat session will be disconnected. In addition, it also prevents new chat sessions from being initiated. For example, if there are three operators available, and one of the operators blocks a session, the user will be prevented from initiating a live chat session with any of the operators.
The operator can reverse the effect of the block by clicking the button.
The telephone help feature allows an operator to provide a user with a phone number and an access code that the user can use to reach the operator by telephone.
The user will not know the operator’s actual phone number. The phone number provided to the user is a central phone number for the server, and the access code is only valid temporarily.
This feature requires an account on Twilio, and it requires that your docassemble server be accessible from the internet.
To enable the call forwarding feature, first go to Twilio and:
- Sign up for an account.
- Note your “account SID.”
- Buy a phone number. Note the phone number.
- Under the “Voice” configuration for the phone number, instruct
Twilio that when a user calls the phone number, Twilio should go to
/voiceURL on your docassemble server to receive TwiML instructions for responding to the call. For example, if you access interviews at https://example.com, set the URL for incoming voice calls to https://example.com/voice.
Then, in your docassemble configuration, add lines like:
Set phone number for the operator
The call forwarding feature will only be available to an operator if the operator has specified a phone number.
The phone number must by specified in E.164 format. In the United States, this simply means that the phone number must begin with “1,” which is the country code for the United States, and must then be followed by the area code and the rest of the phone number.
Once the phone number is entered, and it is not invalid, buttons for activating call forwarding will appear within each session.
After the operator clicks the button, the operator’s screen will look like this, indicating that telephone calls with the first session are enabled.
Clicking the button will toggle the enabling of call forwarding.
Within seconds of the operator enabling call forwarding, the user will see a green telephone icon at the top of the screen.
When users click on the icon (or otherwise go to the Help tab) they will see instructions about how to make the phone call.
Once the phone call is placed, the code will be deactivated, and the user will not longer see the calling instructions or the phone icon.